[metadata]
version=1.0
description="Emrelia E3X -- RealSimGear G500 bezel command map"

# Emrelia E3X command map for the RealSimGear G500 bezel, driven through
# RealSimGear's own X-Plane plugin.
#
# Why this file exists: RealSimGear's stock command map sends BOTH rings of the
# G500's left (PFD) knob to a single command, so out of the box the inner and
# outer rings do the same thing on the E3X -- both move the heading bug. That is
# RealSimGear's default mapping, not an E3X setting. This override separates the
# rings (inner = heading bug, outer = altitude bug) and maps the rest of the
# bezel to the matching E3X controls. It also adds a #SEC block so a second G500
# bezel drives the MFD.
#
# Install: save this file as "CommandMapping.ini" in your aircraft's folder (the
# one that holds the .acf), then in X-Plane open the RealSimGear plugin menu and
# choose "Reload Command Map" (or reload the aircraft). RealSimGear loads the
# aircraft map after its global one and the aircraft map wins, so this replaces
# the stock G500 mapping for that aircraft. To apply it to every aircraft
# instead, add these sections to RealSimGear's global CommandMapping.ini in its
# plugin folder.
#
# Only the controls the G3X Touch has are mapped; every other G500 key is left
# out, so it does nothing. MENU and BACK are press-and-hold aware.

# PRI persona: the primary bezel drives the PFD.
[RealSimGear-G500#PRI]
ENC_LEFT_INNER_CW=e3xtouch/input/left_inner_up
ENC_LEFT_INNER_CCW=e3xtouch/input/left_inner_down
ENC_LEFT_OUTER_CW=e3xtouch/input/left_outer_up
ENC_LEFT_OUTER_CCW=e3xtouch/input/left_outer_down
BTN_LEFT_PRESS=e3xtouch/input/left_inner_press
ENC_RIGHT_INNER_CW=e3xtouch/input/right_inner_up
ENC_RIGHT_INNER_CCW=e3xtouch/input/right_inner_down
ENC_RIGHT_OUTER_CW=e3xtouch/input/right_outer_up
ENC_RIGHT_OUTER_CCW=e3xtouch/input/right_outer_down
BTN_RIGHT_PRESS=e3xtouch/input/right_inner_press
BTN_SOFT_1=e3xtouch/input/nrst
BTN_SOFT_2=e3xtouch/input/direct_to
BTN_SOFT_9=e3xtouch/input/menu
BTN_SOFT_10=e3xtouch/input/back
BTN_MENU=e3xtouch/input/menu
BTN_CLR=e3xtouch/input/back

# SEC persona: a second bezel drives the MFD.
[RealSimGear-G500#SEC]
ENC_LEFT_INNER_CW=e3xtouch/input/mfd/left_inner_up
ENC_LEFT_INNER_CCW=e3xtouch/input/mfd/left_inner_down
ENC_LEFT_OUTER_CW=e3xtouch/input/mfd/left_outer_up
ENC_LEFT_OUTER_CCW=e3xtouch/input/mfd/left_outer_down
BTN_LEFT_PRESS=e3xtouch/input/mfd/left_inner_press
ENC_RIGHT_INNER_CW=e3xtouch/input/mfd/right_inner_up
ENC_RIGHT_INNER_CCW=e3xtouch/input/mfd/right_inner_down
ENC_RIGHT_OUTER_CW=e3xtouch/input/mfd/right_outer_up
ENC_RIGHT_OUTER_CCW=e3xtouch/input/mfd/right_outer_down
BTN_RIGHT_PRESS=e3xtouch/input/mfd/right_inner_press
BTN_SOFT_1=e3xtouch/input/mfd/nrst
BTN_SOFT_2=e3xtouch/input/mfd/direct_to
BTN_SOFT_9=e3xtouch/input/mfd/menu
BTN_SOFT_10=e3xtouch/input/mfd/back
BTN_MENU=e3xtouch/input/mfd/menu
BTN_CLR=e3xtouch/input/mfd/back